JG-E7058 Walk-in Temperature Test Chamber
Introduction:
Feature:
Technical Specifications:
- The walk-in constant temperature test room is widely used in aerospace, aviation, electronics, automobiles, batteries and other industries for accelerated thermal cycle test, alternating temperature test and constant temperature test of electronic and electrical products, materials, parts, equipment, etc.
Feature:
- For aerospace, aviation, electronics, automobiles, batteries and other products and quality inspection institutes, research institutes, colleges and universities and other testing units, provide virtual space to simulate the real environment, and verify product inspection and research and development results.
- The test box is to shorten the development cycle. An indispensable right-hand man to improve product quality and reliability.
Technical Specifications:
| MODEL | JG-E7058 |
| Internal Dimensions | W2000mm * D2000mm * H2100mm |
| External Dimensions | About W2400mm * 2400mm * 3000mm |
| Temperature Range | 5°C ~ 40°C |
| Temperature Fluctuation | £ ±0.5°C |
| Temperature Uniformity | £ ±2°C |
| Cooling Rate | +30°C ~ 5°C ³25 min (average 1°C/min) |
| Heating Rate | 5°C ~ +35°C ³10min (average 3°C/min) |
| Door Opening Method | Single Door or Double Door |
| Meet the Standard |
GB/T5170.2-2008 Temperature Testing Equipment GB/T5170.5-2008 Damp Heat Testing Equipment |
| Test Method |
GB/T 2423.2/IEC 60068-2-2-2008 Basic environmental test procedures for electrical and electronic products Test B: High temperature test GB10592-2008/IEC 60068-3-5 high and low temperature test chamber technical conditions GB/T 5170.1-2008/IEC 60068-1 Basic parameter verification method general rules GB/T5170.2-2008/ IEC 60068-2 Inspection method of environmental testing equipment for electrical and electronic products Temperature testing equipment |
| Power | Three phase, AC 380V |
| Noise | Sound level £ 75dB(A) (1m in front of the gate, 1.2m from the ground, measured in free space) |
| Machine Shock Absorption | The main parts of the machine have shock absorption function |
| Cooling method | Air cooling |
